Gates

Style cast offer a wide range of fencing to suit all tastes and budgets. Most products are in stock and we can supply them for d.i.y or to the trade as well as offering a full Fitting Service. We are able to deliver due to most materials being bulky and heavy.

Closeboard gates

1800mm high x 915mm wide hung either right or left hand from rear are ex stock. Alternative sizes can be made, any width from 450mm up to 1200mm and any height up to 1800mm.

Tongue and groove effect

These are made to order to customer specifications, can be made as pairs. Contact us with your measurements for price and availability.

Pallisade

This is a simple ledge and brace style gate perfect for co-ordinating with Palisade fencing.

Palisade gates are available with all types of variations:

Straight top
Curved top
Pointed pales
Round top pales
Flat top pales

Pale spacing can vary according to personal preference and considering gate width.

Perfect for front gardens, garden divisions, pond areas, vegetable gardens, windy areas and dogs.

Jacktop gates

For use with Jaktop panel and traditional fencing.

Superior planed finish
Designed for use with slotted Jakposts
Traditional attractive design
Matching panels
All fittings and fixings are galvanized including ring latches on gates

Gates as standard are hung on the right when viewed from the outside, but as a special can be hung on the left

Uni-Gates - for the Drive or Field

Our Uni-Gates are called this as they are ‘Universal’ which means they can be hung as right or left handed.

Ideal driveway gates
Designed with heavy top rail over entire width for extra strength
Both hanging and slam stiles are drilled to allow gates to be hung on the left or right
New Planed finish
Rail and brace crossings are bolted with stainless steel bolts
Top bars are chamfered
Cross braced for extra strength
All joints are morticed and tenoned

Specification (0.9 – 4.2m wide)

Gates are 1.27m high overall. Top rail 100mm x 75mm, under rail and cross braces 75 x 25mm. Hanging and slam stiles (rounded top) 100 x 75mm. With both stiles drilled to allow gates to be hung on the left or the right. Supplied in natural Jakcured finish.

Traditional entrance gates

The timber is machined to a standard size, stop chamfered and planed
All joints are morticed and tenoned
All rail and cross bracings are bolted with stainless steel bolts
Traditional attractive designs
Ideal driveway gates

Entrance Gates (wide)

Specification (1.8 – 3.6m wide)

Gates are 1.2m high except for the hanging stile which is 1.5m. Hanging Stile 125 x 75mm, Slam Stile 75 x 75mm, Top Rail is 100 x 75mm and under rail and cross braces 75 x 25mm. Supplied in natural Jakcured finish.

Right hand hanging when viewed from the front (opposite hanging available at no additional cost). Entrance gates are not stocked items, they are made to order.

Entrance Gates (narrow)

Specification (0.9 – 1.5m wide)

Single cross braced. Gates are 1.2m high except for the curved hanging stile which is 1.5m and slam stile 75 x 75mm. Top rail is 100 x 75mm.

Left hand hanging when viewed from the front.

(opposite hanging available at no additional cost).